High Frequency PCB Built on 60mil (1.524mm) RO4350B

High Frequency PCB Built on Rogers 10mil (0.254mm) RO4350B

 

Hi,

RO4350B high frequency material has property of low dielectric tolerance and low loss. PCB built on RO4350B shows excellent electrical performance and it is ideal for antenna applications.

 

Basic specifications

Base material: RO4350B 10mil (0.254mm)

Layer count: 2 layers

Type: PCB in panel

Format: 100mm x 72mm = 2 types = 2 pieces

Surface finish: Immersion gold

Copper weight: Outer layer 35 um/ Inner layer 0 um

Solder mask / Legend: Green solder mask / no silkscreen

Final PCB height: 0.3 mm

Standard: IPC 6012 Class 2

Packing: 25 panels are packed for shipment.

Lead time: 7 working days

Shelf life: 6 months

 

PCB Service

a) Prototype, Small runs and mass production supply capability

b) Range in thickness from 10mil to 60mil

c) Door to door shipping service

 

Contact us today for more preferential price.

 

Best regards

 

Ivy Deng | Business development

Bicheng PCB | sales10@bichengpcb.com |Material partners: Rogers, ITEQ, SHENGYI, TAIYO, KUANGSHUN

If you do not want to receive emails from Bicheng about marketing communications and special offers, reply as "remove" in the subject line.

 

Bicheng is located at Baoan, Shenzhen, China 518103.

Higher-performance UV light-- A proven way to keep your air safer

Hi，

This is Johnson from XPES , Our factory have manufactured UVC lamps for 11 years in China.

Our customer always used UVC Light in air purification, robots，Air purifier，HVAC and etc

What kind of ultraviolet lamp do you usually use？

1. Sold directly by factory, 5 days delivery time for 1000pcs

2. Lamp lifespan up to 12000 hours

3. Superior service after sales in 1 years warranty

4.Ozone Production & No Ozone type

We XPES has manufactured UVC lamps for 12 years, believing we can be your better uv lamp supplier.

Johnson

------------------

Guangdong Xingpu Energy Saving Co.,Ltd

Xingye Road,Shishan Town,Nanhai District,Foshan City,Guangdong,China

Web:www.xpesuvc.com

 

Stock

Hallo Purchaser,

This is Cindy from Kalis Electronics Co., Ltd..

We are major in:
IC: Xilinx , TI , AD , NXP , Altera , ST , Maxim , Linear , Micron ,
Microchip , ON , Fairchild.

Capacitors & Resistors : Samsung , Walsin , Yageo , Murata ,
TDK , AVX , Kemet , Vishay , Taiyo , Fenghua

Transistors & Diode : Diodes , ST , Littelfuse , Vishay , ON, NXP ,
IR , Fairchild, IXYS

Connector: TE/AMP , MOLEX , FCI , DEUTSCH, SAMTEC , Delphi/Aptiv

Any components parts we can do for you ? Welcome to your new inquiry!

STM32F407ZET6   ST
STM32F407VET6   ST
STM32F407ZGT6   ST
ATTINY102F-SSNR    Microchip
ATA6564-GAQW1     Microchip
ATA6564-GBQW1     Microchip

09290566    TE Connectivity
09281010    TE Connectivity
09290287    TE Connectivity

CR10-1003F-T   AVX
CR10-3091F-T   AVX
C3216X5R1C106KT000N   TDK
C3216X5R1E106MT000N   TDK


Thanks & Best regards.
Cindy Zhou

*Kalis Electronics Co., Ltd.
*Address: 32C, AnLiangRoad HengGang Long Gang Dist, ShenZhen , China, 518112
*Tel:+86 0755 28263297
 

If you prefer not to receive emails from us, you may unsubscribed .

High Frequency PCB Built on 30mil (0.762mm) RO4350B

High Frequency PCB Built on Rogers RO4003C With 50ohm Impedance Control

 

Hi,

 

RO4003C high frequency material possesses the properties needed by designers of RF Microwave circuits and matching networks and controlled impedance transmission lines.

 

This PCB is a 4 layer structure built on RO4003C(LoPro) With via in pad and impedance controlled.

 

Build up - 4 Layer

L1: TOP COPPER       1/2oz

       RO4003C_LOPRO     221 um

L2: GND       COPPER       1/2oz

       Prepreg RO4450F     300 um

L3: SIGNAL/POWER  COPPER       1/2oz

       RO4003C_LOPRO     221 um

L4: BOTTOM       COPPER     1/2oz

 

Ground Coplanar Line

LAYER	REF. PLANE	WIDTH	SPACING	IMPEDANCE
L1 (TOP)	L2 (GND)	350 µm	150 µm	50 ohm

 

Basic Specifications

Panel size: 95mm x 72mm = 5 pieces

Solder mask / Silkscreen: Blue / White

Surface finish: ENIG

Finished thickness: 1.0mm ±10%

Special technology: Via in pad, edge plated

Acceptable standard: IPC Class 3

 

Contact us today for more preferential price.

 

Best regards

 

 

Ivy Deng | Business development

Bicheng PCB | sales10@bichengpcb.com |Material partners: Rogers, ITEQ, SHENGYI, TAIYO, KUANGSHUN

If you do not want to receive emails from Bicheng about marketing communications and special offers, reply as "remove" in the subject line.

 

Bicheng is located at Baoan, Shenzhen, China 518103.

CAD,UG,Pro E,Solidworks

Hello Sirs/Madams,

Have a nice day!

We are from CHINA , Nice to meet you here.

As a plastic molds manufacturer and exporter since 1997, CNM has over ten years' experiences in molds for plastic parts of automobiles, home appliances, office machines, precision electronics, medical instruments etc.
It established its own factory in Shenzhen, Guangdong Province, which now occupies an area of 8000 sq meters and is ISO 9001: 2008 certificated.
We can do,
a) CNC Turning,
b) CNC Milling,
c) Cleaning,
d) Plating,
e) heat treatment etc.
F) Mass production for Alu/zinc/steel/copper products

Any need, please send us your RFQ with 2D/3D drawing design or samples. Thanks!

For further information, please write to me.

Naika.Bellhouse

Yours sincerely